Oce CS2436 User Manual - page 437
Handling Paper (CS2436-6)
6. 2. 11.
Handling Paper > Handling rolls >
Keeping Track of the Amount of Roll Paper Left
Setting
ManageRemainRoll
to
On
in the
Paper Menu
of the Control Panel will print a barcode with text on
the roll when the roll is removed that identifies the type of paper and amount left. When
ManageRemainRoll
is
On
and you load rolls with printed barcodes, the type of paper and amount left are automatically detected
after rolls are loaded. The barcode will be cut off after it has been read.
Important
・
Because the
ManageRemainRoll
function is not compatible with clear film, an error
message may be displayed ( "
The roll is empty.
" ) after you load clear film. For this
reason, set
ManageRemainRoll
to
Off
before loading clear film.
・
If the barcode on the roll is not detected, enter the type and length of paper on the
Control Panel.
Follow these steps to set
ManageRemainRoll
to
On
as follows.
1.
On the
Tab Selection screen
of the Control Panel, press or to select the Paper tab (
).
Note
・
If the
Tab Selection screen
is not displayed, press the
Menu
button.
2.
Press the
OK
button.
The
Paper Menu
is displayed.
3.
Press or to select
ManageRemainRoll
, and then press the
OK
button.
4.
Press or to select
On
, and then press the
OK
button.
file:///H|/ITC-dd/Projects/Ud/WFPS/oostende%205/...port/iPF750%20User%20Manual/lang/print/cp04.html (32 of 63) [4-3-2010 11:36:31]