Oce CS2436 User Manual - page 486
Adjustments for Better Print Quality (CS2436-7)
7. 2. 3.
Adjustments for Better Print Quality > Adjusting the feed amount >
Manual Banding Adjustment (Adj. Quality)
If printed images are affected by banding in different colors, execute
Adj. Quality
for adjustment
of the paper feed amount.
Use
Manual
adjustment with highly transparent media or other paper for which
Auto
(GenuinePpr)
or
Auto(OtherPaper)
cannot be used.
(See "Automatic Banding Adjustment (Adj. Quality) (
7.2.3
).")
Manual
adjustment requires you to enter an adjustment value after a test pattern is printed.
Note
・
Always check the
Adj. Priority
values before using
Manual
adjustment.
(See "Selecting a Feed Amount Adjustment Method (Feed Priority) (
7.2.2
).")
・
If additional fine-tuning is necessary after
Manual
adjustment, use
Adj.
Fine Feed
(See "Fine-Tuning the Paper Feed Amount (Adj. Fine Feed) (
7.2.5
).")
・
Use
Adjust Length
to ensure that lines in CAD drawings are printed at
exactly the right length.
(See "Adjusting Line Length (Adjust Length) (
7.2.6
).")
・
Use paper of the same type and size for adjustment as you will use for
printing.
Paper to Prepare
Rolls
An unused roll at least 10 inches wide
Sheets
Two sheets of unused paper of at least A4/Letter size
Perform adjustment as follows.
1.
Load the paper.
●
Attaching the Roll Holder to Rolls (
6.2.1
)
●
Loading Rolls in the Printer (
6.2.2
)
●
Loading Sheets in the Printer (
6.3.1
)
Note
・
Always make sure the loaded paper matches the type of paper
specified. Adjustment cannot be completed correctly unless the loaded
paper matches the settings.
file:///H|/ITC-dd/Projects/Ud/WFPS/oostende%205/...port/iPF750%20User%20Manual/lang/print/cp70.html (18 of 25) [4-3-2010 11:36:36]