Oce CS2436 User Manual - page 541
Printer Parts (CS2436-8)
8. 2. 11.
Printer Parts > Control Panel >
Printing Interface Setting Reports
You can print an
Interface Print
report indicating the current interface settings values of the printer.
Interface Print
reports indicate settings values for TCP/IP, NetWare, and other settings.
Printing Interface Print reports
1.
Load the paper.
If using sheets, load paper A4/Letter-sized, you will need at least three sheets.
2.
On the
Tab Selection screen
of the Control Panel, press or to select the Settings/Adj. tab (
).
Note
・
If the
Tab Selection screen
is not displayed, press the
Menu
button.
3.
Press the
OK
button.
The
Set./Adj. Menu
is displayed.
4.
Press or to select
Test Print
, and then press the
OK
button.
5.
Press or to select
Interface Print
, and then press the
OK
button.
Confirming Interface Print information
The following information is included in the
Interface Print
report.
Océ CSxxxx Interface Print
Printer model
Firm
Firmware Version
Boot
Boot ROM Version
MIT(DBF) MIT Database Format Version
MIT(DB)
MIT Database Version
S/N
Printer serial number
Date
The date when the interface setup print report
was printed.
EOP Timer
Sets the elapsed
time between
receiving last data
and canceling
printing.
Frame Type
Use DHCP
Use BOOTP
Use RARP
Enable DNS Dynamic
Update
Use Zeroconf Function
IP Address
1]
file:///H|/ITC-dd/Projects/Ud/WFPS/oostende%205/...port/iPF750%20User%20Manual/lang/print/cp05.html (48 of 57) [4-3-2010 11:36:5