Oce CS2436 User Manual - page 526
Printer Parts (CS2436-8)
8. 2. 8.
Printer Parts > Control Panel >
Menu Settings
Menu items are as follows.
For instructions on selecting menu items, see "Menu Operations (
8.2.6
)."
For details on menu levels and values, see "Menu Structure (
8.2.7
)."
Paper Menu
Setting Item
Description, Instructions
Load Paper
Select sheets or rolls and load the paper.
Eject Paper
Choose this item before removing loaded paper.
Chg. Paper Type
(
*1
)
Change the type of paper loaded. (See "Changing
the Type of Paper (
6.2.3
).")
Chg. Paper Size
Change the size of paper loaded. (See "Specifying
the Paper Length (
6.2.4
).") (See "Paper
Sizes (
6.1.2
).")
ManageRemainRoll
Choose
On
to print a barcode at the end of a roll
before you remove it. The printed barcode can be
used in managing the amount of roll paper left.
Choose
Off
if you prefer not to print the barcode.
(See "Keeping Track of the Amount of Roll Paper
Left (
6.2.11
).")
Head Height
Adjust the Printhead height. (See "Troubleshooting
Paper Abrasion and Blurry Images (Head
Height) (
7.1.5
).")
Skew Check Lv.
If you print on Japanese paper (washi) or other
handmade paper that has an irregular width,
choose
Loose
for a higher skew detection
threshold, or choose
Off
to disable skew detection.
However, if paper is loaded askew when detection
is
Off
, note that paper jams or Platen soiling may
occur.
Cutting Mode
Specify whether or not to cut with the standard
round-bladed cutter.
Choose
Automatic
to have the roll cut
automatically after printing. If you choose
Manual
,
the paper will not be cut after printing. Instead, a
line will be printed at the cut position.
Choose
Eject
if you prefer not to have documents
dropped immediately after printing, as when
waiting for ink to dry.
Cut Speed
Choose the cutting speed. If you use adhesive
paper, choosing
Slow
helps prevent adhesive from
sticking to the cutter and keeps the cutter sharp.
Trim Edge First
If a roll is loaded, the end of the paper will be cut.
CutDustReduct.
If you choose
On
, a line will be printed at the cut
position when paper cutting is selected. This option
reduces the amount of debris given off after
cutting. It also helps prevent adhesive from sticking
to the cutter and keeps the cutter sharp if you use
adhesive paper. (See "Reducing Dust from Cutting
Rolls (
6.2.15
).")
VacuumStrngth
Specify the level of suction that holds paper against
the Platen. (See "Adjusting the Vacuum Strength
(VacuumStrngth) (
7.2.7
).")
1]
file:///H|/ITC-dd/Projects/Ud/WFPS/oostende%205/...port/iPF750%20User%20Manual/lang/print/cp05.html (33 of 57) [4-3-2010 11:36:5