Oce CS2436 User Manual - page 558
Network Setting (CS2436-9)
9. 1. 4.
Network Setting > Network Setting >
Configuring the IP Address Using the Printer Control Panel
This topic describes how to configure the printer's IP address on the Control Panel.
1.
On the
Tab Selection screen
of the Control Panel, press or to select the Settings/
Adj. tab (
).
Note
・
If the
Tab Selection screen
is not displayed, press the
Menu
button.
2.
Press the
OK
button.
The
Set./Adj. Menu
is displayed.
3.
Press or to select
Interface Setup
, and then press the
OK
button.
4.
Press or to select
TCP/IP
, and then press the
OK
button.
5.
Press or to select
IPv4
, and then press the
OK
button.
6.
Press or to select
IPv4 Settings
, and then press the
OK
button.
7.
Press or to select
IP Address
, and then press the
OK
button.
8.
After you press or to select the input field, numerical input is possible.
9.
Press the or button to enter the value.
Note
・
Pressing the button increases the number by 1. The maximum
value is
9,
after which
0
is displayed.
・
Pressing the button decreases the number by 1. The minimum
value is
0,
after which
9
is displayed.
・
Hold down or to increase or decrease the value continuously.
・
Make sure the IP address you enter for the printer is not the same as
any computer IP address in your network.
10.
Repeat steps 8 and 9 to complete the settings, and then press the
OK
button.
]
file:///H|/ITC-dd/Projects/Ud/WFPS/oostende%205/...port/iPF750%20User%20Manual/lang/print/cp06.html (8 of 60) [4-3-2010 11:37:03