Oce CS2436 User Manual - page 515
Printer Parts (CS2436-8)
Specifying menu items
Menu items can be set as follows.
1.
Press or to select the desired setting, and then press the
OK
button.
After two seconds, the display reverts to the upper level menu.
Note
・
If a confirmation message is displayed regarding the setting you entered, press the
OK
button. The setting is
applied, and the printer is now in
Standby
.
Specifying numerical values
Follow these steps to enter numbers. In this example, network settings items are entered.
1.
Press the or button to move to the next field for input.
2.
Press the or button to enter the value.
Note
・
Hold down or to increase or decrease the value continuously.
3.
Repeat steps 1 and 2 to complete the settings, and then press the
OK
button.
Note
・
If a confirmation message is displayed regarding the setting you entered, press the
OK
button. The setting is
applied, and the printer is now in
Standby
.
Executing menu commands
Menu commands can be executed as follows.
1]
file:///H|/ITC-dd/Projects/Ud/WFPS/oostende%205/...port/iPF750%20User%20Manual/lang/print/cp05.html (22 of 57) [4-3-2010 11:36:5