Oce CS2436 User Manual - page 581
Network Setting (CS2436-9)
9. 2. 1.
Network Setting > Network Setting (Windows) >
Configuring the Printer Driver Destination
This topic describes how to specify the printer driver destination if the printer's IP address is
changed, or if you will use the printer over a network connection instead of via USB connection.
The procedure described below is the configuration based on the LPR or Raw protocol using the
standard TCP/IP port in Windows (
Standard TCP/IP Port
).
Important
・
If you will use the printer in a TCP/IP network, make sure the printer's IP
address is configured correctly.
・
Configuring the IP Address on the Printer (
9.1.2
)
1.
Open the
Printers and Faxes
(or
Printers
) window.
2.
Right-click the icon of this printer and choose
Properties
to open the printer properties
window.
3.
Click the
Port
tab to display the
Port
sheet.
4.
Click
Add Port
to display the
Printer Ports
dialog box.
5.
In the
Available Port
list, select
Standard TCP/IP Port
.
6.
Click
New Port
.
After the wizard starts, a window is displayed for the
Welcome to the Add Standard
TCP/IP Printer Port Wizard
.
7.
Click
Next
.
8.
In
Printer Name or IP Address
, enter the printer's IP address.
9.
Follow the instructions on the screen to add a printer port.
10.
Click
Close
to close the
Printer Ports
dialog box.
11.
Make sure the printer port you added is displayed under
Ports
, and that the port is
selected.
12.
Click
Close
to close the printer properties window.
3]
file:///H|/ITC-dd/Projects/Ud/WFPS/oostende%205/...port/iPF750%20User%20Manual/lang/print/cp06.html (31 of 60) [4-3-2010 11:37:0