Oce CS2436 User Manual - page 493
Adjustments for Better Print Quality (CS2436-7)
7. 2. 6.
Adjustments for Better Print Quality > Adjusting the feed amount >
Adjusting the Vacuum Strength (VacuumStrngth)
When printing on heavyweight paper or paper that curls or wrinkles easily, if the Printhead rubs
against paper, adjusting the level of suction against paper on the Platen may improve results.
1.
On the
Tab Selection screen
of the Control Panel, press or to select the Paper tab (
).
Note
・
If the
Tab Selection screen
is not displayed, press the
Menu
button.
2.
Press the
OK
button.
The
Paper Menu
is displayed.
3.
Press or to select
Paper Details
, and then press the
OK
button.
4.
Press or to select the type of paper, and then press the
OK
button.
5.
Press or to select
VacuumStrngth
, and then press the
OK
button.
6.
Press or to select the desired setting value, and then press the
OK
button.
file:///H|/ITC-dd/Projects/Ud/WFPS/oostende%205/...port/iPF750%20User%20Manual/lang/print/cp70.html (25 of 25) [4-3-2010 11:36:36]