Oce CS2436 User Manual - page 425
Handling Paper (CS2436-6)
6. 2. 6.
Handling Paper > Handling rolls >
Removing the Roll from the Printer
Remove rolls from the printer as follows.
Note
・
If you need to cut the roll, see "Specifying the Cutting Method for Rolls (
6.2.13
)."
1.
On the
Tab Selection screen
of the Control Panel, press or to select the Paper tab (
).
Note
・
If the
Tab Selection screen
is not displayed, press the
Menu
button.
2.
Press the
OK
button.
The
Paper Menu
is displayed.
3.
Press or to select
Eject Paper
, and then press the
OK
button.
4.
Press or to select "
Yes
", and then press the
OK
button.
The roll is now rewound and ejected.
Caution
・
If you have selected
ManageRemainRoll
>
On
in the Control Panel menu, a
barcode is printed on the leading edge of the roll.
Do not remove the roll before the barcode is printed. You will be unable to keep
track of the amount of roll paper left. (See "Keeping Track of the Amount of Roll
Paper Left (
6.2.11
).")
5.
Positioning your hands as shown, open the Roll Cover.
file:///H|/ITC-dd/Projects/Ud/WFPS/oostende%205/...port/iPF750%20User%20Manual/lang/print/cp04.html (20 of 63) [4-3-2010 11:36:31]