Oce CS2436 User Manual - page 417
Handling Paper (CS2436-6)
・
Do not force the Roll Holder into the printer with the right and left ends reversed.
This may damage the printer and Roll Holder.
・
Do not release the flanges until the holder is loaded in the Roll Holder Slot.
・
Be careful not to pinch your fingers between the Roll Loading Slots (b) and the
Roll Holder shaft (c) when loading rolls.
6.
Advance the roll to insert the leading edge in the Paper Feed Slot (a) until you hear a tone.
Important
・
Be careful not to soil the printing surface of roll paper as you insert it in the slot.
This may affect the printing quality. We recommend wearing clean cloth gloves
when handling rolls to protect the printing surface.
・
If the paper is wrinkled or warped, straighten it out before loading it.
・
Load paper straight so it is not fed askew.
7.
Once paper feeding starts, you will need to do the following, based on the
ManageRemainRoll
setting
and the barcode printed on rolls. (See "Keeping Track of the Amount of Roll Paper Left (
6.2.11
).")
ManageRemainRoll
Barcodes
Printer Operation After the Paper is Fed
Off
Printed
A menu for selection of the type of paper is
automatically shown on the Display Screen.
Press or to select the type of paper,
and then press the
OK
button.
Not printed
file:///H|/ITC-dd/Projects/Ud/WFPS/oostende%205/...port/iPF750%20User%20Manual/lang/print/cp04.html (12 of 63) [4-3-2010 11:36:31]