Oce CS2436 User Manual - Height)
Adjustments for Better Print Quality (CS2436-7)
7. 1. 5.
Adjustments for Better Print Quality > Adjusting the Printhead >
Troubleshooting Paper Abrasion and Blurry Images (Head
Height)
If the Printhead rubs against paper during printing, adjusting the Printhead height may improve
results.
If image edges are blurred, it may help to lower the Printhead.
Note
・
Raise or lower the printhead, depending on the nature of the problem.
(See "Paper rubs against the Printhead (
11.5.2
).")
(See "The edges of the paper are dirty (
11.5.3
).")
(See "Image edges are blurred or white banding occurs (
11.5.9
).")
1.
On the
Tab Selection screen
of the Control Panel, press or to select the Paper tab (
).
Note
・
If the
Tab Selection screen
is not displayed, press the
Menu
button.
2.
Press the
OK
button.
The
Paper Menu
is displayed.
3.
Press or to select
Paper Details
, and then press the
OK
button.
4.
Press or to select the type of paper, and then press the
OK
button.
5.
Press or to select
Head Height
, and then press the
OK
button.
6.
Press or to select the desired setting value, and then press the
OK
button.
Note
・
Depending on the type of paper, some setting values may not be
available.
file:///H|/ITC-dd/Projects/Ud/WFPS/oostende%205/...port/iPF750%20User%20Manual/lang/print/cp70.html (13 of 25) [4-3-2010 11:36:36]