Oce CS2436 User Manual - page 449
Handling Paper (CS2436-6)
6. 2. 15.
Handling Paper > Handling rolls >
Reducing Dust from Cutting Rolls
For media such as Backlit Film that are more likely to generate debris when cut, select
CutDustReduct.
>
On
in
the
Paper Menu
of the Control Panel. This option reduces debris from cutting by printing black lines at the
leading and trailing edges of documents. It may help prevent Printhead damage. You can specify for
CutDustReduct.
to be activated for particular types of paper.
Important
・
Do not set
CutDustReduct.
to
On
for paper that wrinkles easily, such as Plain Paper or
lightweight paper. This may impair cutting and cause paper jams.
・
Borderless printing is not available when
CutDustReduct.
is set to
On
. To use
borderless printing, select
CutDustReduct.
>
Off
.
Set
CutDustReduct.
to
On
as follows.
1.
On the
Tab Selection screen
of the Control Panel, press or to select the Paper tab (
).
Note
・
If the
Tab Selection screen
is not displayed, press the
Menu
button.
2.
Press the
OK
button.
The
Paper Menu
is displayed.
3.
Press or to select
Paper Details
, and then press the
OK
button.
4.
Press or to select the type of paper loaded in the printer, and then press the
OK
button.
5.
Press or to select
CutDustReduct.
, and then press the
OK
button.
6.
Press or to select
On
, and then press the
OK
button.
file:///H|/ITC-dd/Projects/Ud/WFPS/oostende%205/...port/iPF750%20User%20Manual/lang/print/cp04.html (44 of 63) [4-3-2010 11:36:31]