Oce CS2436 User Manual - Adjusting The Feed Amount
Adjustments for Better Print Quality (CS2436-7)
7. 2. 1.
Adjustments for Better Print Quality > Adjusting the feed amount >
Adjusting the Feed Amount
If printed documents are affected by the following problems, try adjusting the feed amount.
●
Banding in different colors
●
Line length is not accurate in the direction paper is fed
To adjust the feed amount, do the following, in this order.
1.
Depending on the issue, adjust
Adj. Priority
to suit the particular type of paper.
(See "Selecting a Feed Amount Adjustment Method (Feed Priority) (
7.2.2
).")
2.
Execute
Adj. Quality
or
Adjust Length
, depending on the selection in
Adj. Priority
.
(See "Automatic Banding Adjustment (Adj. Quality) (
7.2.3
).")
(See "Manual Banding Adjustment (Adj. Quality) (
7.2.4
).")
(See "Adjusting Line Length (Adjust Length) (
7.2.6
).")
3.
After executing
Adj. Quality
, execute
Adj. Fine Feed
for further adjustment as needed.
(See "Fine-Tuning the Paper Feed Amount (Adj. Fine Feed) (
7.2.5
).")
file:///H|/ITC-dd/Projects/Ud/WFPS/oostende%205/...port/iPF750%20User%20Manual/lang/print/cp70.html (15 of 25) [4-3-2010 11:36:36]