Oce CS2436 User Manual - Number)
Error Message (CS2436-12)
12. 1. 16.
Error Message > Error Messages >
Hardware error. xxxxxxxx-xxxx (x represents a letter or
number)
Cause
Corrective Action
The last portion of roll paper was used during a
print job. The paper was not advanced because
the trailing edge is taped to the roll.
Turn off the printer and
remove the roll from
the printer before
restoring power.
Fastening tape or the Belt Stopper has not been
removed inside the Top Cover.
Turn off the printer,
open the Top Cover
and remove the tape or
the Belt Stopper before
restoring power.
An error requiring service may have occurred.
Turn off the printer and
wait at least three
seconds before
restoring the power.
If the message is
displayed again, write
down the error code
and message, turn off
the printer, and contact
your Océ dealer for
assistance.
file:///H|/ITC-dd/Projects/Ud/WFPS/oostende%205...ort/iPF750%20User%20Manual/lang/print/cp10.html (21 of 133) [4-3-2010 11:37:37]