Oce CS2436 User Manual - Posi. Adj.)
Adjustments for Better Print Quality (CS2436-7)
7. 1. 3.
Adjustments for Better Print Quality > Adjusting the Printhead >
Manual Adjustment to Straighten Lines and Colors (Head
Posi. Adj.)
If printed vertical lines are warped or colors are out of alignment, execute
Head Posi. Adj.
to
adjust the Printhead alignment.
Normally, execute
Auto(Standard)
or
Auto(Advanced)
.
(See "Automatic Adjustment to Straighten Lines and Colors (Head Posi. Adj.) (
7.1.2
).")
However, when printing on special paper, or if printing is not improved after
Auto(Advanced)
,
try
Manual
.
Manual
adjustment requires you to examine the printed test pattern and enter an adjustment
value.
Note
・
Manual
may be unavailable in some cases, even if it is displayed in the
menu.
If so, execute
Auto(Advanced)
once.
・
Always make sure the loaded paper matches the type of paper specified on
the printer. Adjustment cannot be completed correctly unless the loaded
paper matches the settings.
・
We recommend using the type of paper you use most often for adjustment.
Paper to Prepare
Rolls
An unused roll at least 10 inches wide
Sheets
One sheet of unused paper of at least A4/Letter size
Perform adjustment as follows.
1.
Load the paper.
file:///H|/ITC-dd/Projects/Ud/WFPS/oostende%205/...port/iPF750%20User%20Manual/lang/print/cp70.html (6 of 25) [4-3-2010 11:36:36]