Oce CS2436 User Manual - page 562
Network Setting (CS2436-9)
9. 1. 6.
Network Setting > Network Setting >
Configuring TCP/IPv6 Network Settings
When printing in a TCP/IPv6 network, you must configure the TCP/IPv6 settings on the Control
Panel.
Follow the steps below to configure the TCP/IPv6 network settings.
1.
On the
Tab Selection screen
of the Control Panel, press or to select the Settings/
Adj. tab (
).
Note
・
If the
Tab Selection screen
is not displayed, press the
Menu
button.
2.
Press the
OK
button.
The
Set./Adj. Menu
is displayed.
3.
Press or to select
Interface Setup
, and then press the
OK
button.
4.
Press or to select
TCP/IP
, and then press the
OK
button.
5.
Press or to select
IPv6
, and then press the
OK
button.
6.
Press or to select
IPv6 Support
, and then press the
OK
button.
7.
Press or to select
On
, and then press the
OK
button.
Important
・
Once you set
IPv6 Support
to
On
, the
IPv6 StlessAddrs
setting takes
effect.
・
You can also configure
IPv6 StlessAddrs
and
DHCPv6
from the printer
Control Panel.
3]
file:///H|/ITC-dd/Projects/Ud/WFPS/oostende%205/...port/iPF750%20User%20Manual/lang/print/cp06.html (12 of 60) [4-3-2010 11:37:0