Oce CS2436 User Manual - Cleaning The Printhead
Maintenance (CS2436-10)
10. 4. 3.
Maintenance > Cleaning the Printer >
Cleaning the Printhead
If printing is faint, cleaning the Printhead may improve results.
Choose one of two Printhead cleaning modes (
Head Cleaning A
or
Head Cleaning B
),
depending on the problem to resolve.
●
Head Cleaning A
Use this mode if printing is faint or contains foreign substances. This method of cleaning
consumes the least amount of ink.
It takes about three and a half minutes to complete.
●
Head Cleaning B
Use this mode if no ink is ejected at all, or if
Head Cleaning A
does not solve the
problem.
It takes about four minutes to complete.
Caution
・
Do not remove the Maintenance Cartridge or ink tanks during either
Head
Cleaning A
or
Head Cleaning B
.
Note
・
If printing does not improve after
Head Cleaning B
, try repeating
Head
Cleaning B
once or twice. If this still does not improve printing, the
Printhead may have reached the end of its useful life. Contact your Océ
dealer for assistance.
・
Nozzles are periodically checked to ensure they are clear. Configure the
settings on the Control Panel menu in
Nozzle Check
. (See "Menu
Settings (
8.2.8
).")
Perform cleaning as follows.
1.
On the
Tab Selection screen
of the Control Panel, press or to select the Settings/
Adj. tab (
).
1]
file:///H|/ITC-dd/Projects/Ud/WFPS/oostende%205/...port/iPF750%20User%20Manual/lang/print/cp07.html (41 of 48) [4-3-2010 11:37:1