D-Link xStack DXS-3350SR Installation & User Manual - System Log Server

DXS-3350SR Gigabit Layer 3 Switch 

The user may set the following traffic segmentation parameters: 

Parameter  

Description 

Unit 

Select the unit in the stack you want to configure. 

Port 

Check the corresponding boxes for the port(s) you wish to transmit packets. 

Forward Portlist 

Check the boxes to select which of the ports on the Switch will be able to forward 

packets. These ports will be allowed to receive packets from the port specified above. 

Clicking the Apply button will enter the combination of transmitting port and allowed receiving ports into the Switch's 

Traffic Segmentation Table. 

System Log Server 

The Switch can send Syslog messages to up to four designated servers using the System Log Server. In the Configuration 

folder, click System Log Server, to view the screen shown below. 

Figure 6- 50. System Log Servers window 

The parameters configured for adding and editing System Log Server settings are the same. See the table below for a 

description. 

Figure 6- 51. System Log Servers – Add 

97