D-Link xStack DXS-3350SR Installation & User Manual - page 76
DXS-3350SR Gigabit Layer 3 Switch
To configure the parameters for a previously set MSTI, click on its hyperlinked MSTI ID number, which will reveal the
following screen for configuration.
Figure 6- 22. Instance ID Settings window – modify
The user may configure the following parameters for a MSTI on the Switch.
Parameter Description
MSTI ID
Displays the MSTI ID previously set by the user.
Type
This field allows the user to choose a desired method for altering the MSTI settings.
The user has 4 choices.
Add - Select this parameter to add VIDs to the MSTI ID, in conjunction with the VID
List parameter.
Remove - Select this parameter to remove VIDs from the MSTI ID, in conjunction with
the VID List parameter.
Delete - Select this parameter to delete this MSTI ID.
Set Priority Only - Select this parameter to set the priority for the MSTI ID. This field is
used in conjunction with the Priority field.
VID List (1-4094)
This field is used to specify the VID range from configured VLANs set on the Switch
that the user wishes to add to this MSTI ID. Supported VIDs on the Switch range from
ID number 1 to 4094. This parameter can only be utilized if the Type chosen is Add or
Remove.
Click Apply to implement changes made.
67