D-Link xStack DXS-3350SR Installation & User Manual - Initialize Ports
Other manuals for xStack DXS-3350SR:
User Manual, User Manual, Command Line Interface Reference Manual, Specifications
Manual is about: Layer 3 Stackable Gigabit Ethernet Switch
of
284
DXS-3350SR Gigabit Layer 3 Switch
Configure the following 802.1x capability settings:
Parameter Description
Unit
Unit being configured for 802.1x settings.
From and To
Ports being configured for 802.1x settings.
Capability
Two role choices can be selected:
Authenticator - A user must pass the authentication process to gain access to the
network.
None - The port is not controlled by the 802.1x functions.
Initialize Ports
Existing 802.1x port settings are displayed and can be configured using the windows below.
Click Port Access Entity > PAE System Control > Initialize Port(s) to open the Initialize Port window:
Figure 6- 73. Initialize Port (Port-Based) window
124