D-Link xStack DXS-3350SR Installation & User Manual - Download Configuration File
DXS-3350SR Gigabit Layer 3 Switch
Download Configuration File
To download a settings file from a TFTP server, click on the TFTP Service folder in the Maintenance folder and then the
Download Configuration File link:
Figure 9- 2. Download Settings from TFTP Server window
Enter the IP address of the TFTP server and specify the location of the Switch settings file on the TFTP server.
Click Start to record the IP address of the TFTP server and to initiate the file transfer.
Upload Configuration
To upload the Switch settings to a TFTP server, click on the TFTP Services folder, located in the Maintenance folder, and
then click the Upload Configuration link:
Figure 9- 3. Upload Settings to TFTP Server window
Enter the IP address of the TFTP server and the path and filename for the Switch settings on the TFTP server.
Click Start to record the IP address of the TFTP server and to initiate the file transfer.
Upload Log
To upload the Switch history log file to a TFTP server, open the TFTP Services folder in the Maintenance folder and then
click the Upload Log link:
Figure 9- 4. Upload Log to TFTP Server window
Enter the IP address of the TFTP server and the path and filename for the history log on the TFTP server.
Click Start to record the IP address of the TFTP server and to initiate the file transfer.
Multiple Image Services
The Multiple Image Services folder allows users of the DXS-3326GSR to configure and view information regarding
firmware located on the Switch. The Switch allows two firmware images to be stored in its memory and either can be
configured to be the boot up firmware for the Switch. For information regarding firmware images located on the Switch,
244