D-Link xStack DXS-3350SR Installation & User Manual - Security Ip
DXS-3350SR Gigabit Layer 3 Switch
Security IP
Go to the Management folder and click on the Security IP link; the following screen will appear.
Figure 7- 1. Security IP Management Setup
Use the Security IP Management to permit remote stations to manage the Switch. If you choose to define one or more
designated management stations, only the chosen stations, as defined by IP address, will be allowed management privilege
through the web manager or Telnet session. To define a management station IP setting, type in the IP address and click the
Apply button.
User Accounts
Use the User Accounts Management window to control user privileges. To view existing User Accounts, open the
Security Management folder and click on the User Accounts link. This will open the User Account Management page,
as shown below.
Figure 7- 2. User Accounts Management Table
To add a new user, click on the Add button. To modify or delete an existing user, click on the Modify button for that user.
Figure 7- 3. User Accounts Modify Table - Add
Add a new user by typing in a User Name, and New Password and retype the same password in the Confirm New
Password. Choose the level of privilege (Admin or User) from the Access Right drop-down menu.
181