D-Link xStack DXS-3350SR Installation & User Manual - Snmp Group Table
DXS-3350SR Gigabit Layer 3 Switch
SNMP Group Table
An SNMP Group created with this table maps SNMP users (identified in the SNMP User Table) to the views created in the
previous menu. To view the SNMP Group Table, open the SNMP Manager folder and click the SNMP Group Table
entry. The following screen should appear:
Figure 7- 31. SNMP Group Table
To delete an existing SNMP Group Table entry, click the corresponding
under the Delete heading.
To display the current settings for an existing SNMP Group Table entry, click the hyperlink for the entry under the Group
Name.
Figure 7- 32. SNMP Group Table Display
To add a new entry to the Switch's SNMP Group Table, click the Add button in the upper left-hand corner of the SNMP
Group Table page. This will open the SNMP Group Table Configuration page, as shown below.
207