D-Link xStack DXS-3350SR Installation & User Manual - Gvrp Setting
Other manuals for xStack DXS-3350SR:
User Manual, User Manual, Command Line Interface Reference Manual, Specifications
Manual is about: Layer 3 Stackable Gigabit Ethernet Switch
of
284
DXS-3350SR Gigabit Layer 3 Switch
GVRP Setting
In the Configuration menu, open the VLANs folder and click GVRP Setting.
The 802.1Q Port Settings dialog box, shown below, allows you to determine whether the Switch will share its VLAN
configuration information with other GARP VLAN Registration Protocol (GVRP) enabled Switches. In addition, Ingress
Checking can be used to limit traffic by filtering incoming packets whose PVID does not match the PVID of the port.
Results can be seen in the table under the configuration settings, as seen below.
Figure 6- 37. GVRP Settings configuration and table
82