D-Link xStack DXS-3350SR Installation & User Manual - page 109
DXS-3350SR Gigabit Layer 3 Switch
The following parameters can be set or are displayed:
Parameter
Description
Current Time: Status
System Boot Time
Displays the time when the Switch was initially started for this session.
Current Time
Displays the current time.
Time Source
Displays the source of the time settings viewed here.
Current Time: SNTP Settings
SNTP State
Use this pull-down menu to Enable or Disable SNTP.
SNTP Primary Server This is the IP address of the primary server the SNTP information will be taken from.
SNTP Secondary
Server
This is the IP address of the secondary server the SNTP information will be taken
from.
SNTP Poll Interval in
Seconds (30-99999)
This is the interval, in seconds, between requests for updated SNTP information.
Current Time: Set Current Time
Year
Enter the current year, if you want to update the system clock.
Month
Enter the current month, if you would like to update the system clock.
Day
Enter the current day, if you would like to update the system clock.
Time in HH MM SS
Enter the current time in hours and minutes, if you would like to update the system
clock.
Click Apply to implement your changes.
100