D-Link xStack DXS-3350SR Installation & User Manual - page 90
DXS-3350SR Gigabit Layer 3 Switch
Figure 6- 36. 802.1Q Static VLANs Entry Settings - Modify
The following fields can then be set in either the Add or Modify 802.1Q Static VLANs menus:
Parameter
Description
VID (VLAN ID)
Allows the entry of a VLAN ID in the Add dialog box, or displays the VLAN ID of an
existing VLAN in the Modify dialog box. VLANs can be identified by either the VID or
the VLAN name.
VLAN Name
Allows the entry of a name for the new VLAN in the Add dialog box, or for editing the
VLAN name in the Modify dialog box.
Advertisement
Enabling this function will allow the Switch to send out GVRP packets to outside
sources, notifying that they may join the existing VLAN.
Port Settings
Allows an individual port to be specified as member of a VLAN.
Tag
Specifies the port as either 802.1Q tagging or 802.1Q untagged. Checking the box will
designate the port as Tagged.
None
Allows an individual port to be specified as a non-VLAN member.
Egress
Select this to specify the port as a static member of the VLAN. Egress member ports
are ports that will be transmitting traffic for the VLAN. These ports can be either tagged
or untagged.
Forbidden
Select this to specify the port as not being a member of the VLAN and that the port is
forbidden from becoming a member of the VLAN dynamically.
Click Apply to implement changes made.
81