D-Link xStack DXS-3350SR Installation & User Manual - Reset
DXS-3350SR Gigabit Layer 3 Switch
Figure 9- 8. Save Settings window (only save log)
Figure 9- 9. Save Settings window (save configuration and log)
These settings will be used every time the Switch is rebooted. See the Reset section for more information on changing
configurations saved to NV-Ram.
Reset
The Reset function has several options when resetting the Switch. Some of the current configuration parameters can be
retained while resetting all other configuration parameters to their factory defaults.
NOTE: Only the Reset System option will enter the factory default parameters into the Switch’s
non-volatile RAM, and then restart the Switch. All other options enter the factory defaults into
the current configuration, but do not save this configuration. Reset Systemwill return the
Switch’s configuration to the state it was when it left the factory
Figure 9- 10. Factory Reset to Default Value window
248