D-Link xStack DXS-3350SR Installation & User Manual - Dvmrp Monitoring
DXS-3350SR Gigabit Layer 3 Switch
DVMRP Monitoring
This menu allows the DVMRP (Distance-Vector Multicast Routing Protocol) to be monitored for each IP interface defined
on the Switch. This folder, found in the Monitoring folder, offers 3 screens for monitoring; Browse DVMRP Routing
Table, Browse DVMRP Neighbor Address Table and Browse DVMRP Routing Next Hop Table. Information on
DVMRP and its features in relation to the DXS-3350SR can be found under IP Multicasting.
DVMRP Routing Table
Multicast routing information is gathered and stored by DVMRP in the DVMRP Routing Table, which may be found in
the Monitoring folder under Browse DVMRP Monitoring, contains one row for each port in a DVMRP mode. Each
routing entry contains information about the source and multicast group, and incoming and outgoing interfaces. You may
define your search by entering a Source IP Address and its subnet mask into the fields at the top of the page.
Figure 8- 3 . DVMRP Routing Table
3
DVMRP Neighbor Address Table
This table, found in the Monitoring menu under DVMRP Monitor > Browse DVMRP Neighbor Address Table contains
information about DVMRP neighbors of the Switch. To search this table, enter either an Interface Name or Neighbor
Address into the respective fieldand click the Find button. DVMRP neighbors of that entry will appear in the DVMRP
Neighbor Table below.
Figure 8- 34. DVMRP Neighbor Address Table
240