D-Link xStack DXS-3350SR Installation & User Manual - Pae System Control
DXS-3350SR Gigabit Layer 3 Switch
PAE System Control
Existing 802.1x port settings are displayed and can be configured using the windows below.
NOTE: By default, the Switch 802.1x is set to Disabled. Use the drop-
down menu on the Switch Information (Advanced Settings) window to
set Switch 802.1x to either PortBase or MAC Base.
Port Capability Settings
Click Port Access Entity > PAE System Control > Port Capability Settings to view the following window:
Figure 6- 72. 802.1x Capability Settings window
To set up the Switch's 802.1x port-based authentication, select which unit and ports are to be configured in the Unit and
From/To fields. Next, enable the ports by selecting Authenticator from the drop-down menu under Capability. Click Apply
to let your change take effect.
123