D-Link xStack DXS-3350SR Installation & User Manual - page 194
DXS-3350SR Gigabit Layer 3 Switch
Application's Authentication Settings
This window is used to configure Switch configuration applications (console, Telnet, SSH, web) for login at the user level
and at the administration level (Enable Admin) utilizing a previously configured method list. To view the following
window, click Security Management > Access Authentication Control > Application Authentication Settings:
Figure 7- 6. Application's Authentication Settings
The following parameters can be set:
Parameter Description
Application
Lists the configuration applications on the Switch. The user may configure the
Login Method List and Enable Method List for authentication for users utilizing the
Console (Command Line Interface) application, the Telnet application, SSH and
the WEB (HTTP) application.
Login Method List
Using the pull down menu, configure an application for normal login on the user
level, utilizing a previously configured method list. The user may use the default
Method List or other Method List configured by the user. See the Login Method
Lists window, in this section, for more information.
Enable Method List
Using the pull down menu, configure an application for normal login on the user
level, utilizing a previously configured method list. The user may use the default
Method List or other Method List configured by the user. See the Enable Method
Lists window, in this section, for more information
Click Apply to implement changes made.
185