D-Link xStack DXS-3350SR Installation & User Manual - Reauthenticate Port(S)
DXS-3350SR Gigabit Layer 3 Switch
Reauthenticate Port(s)
These windows allow you to reauthenticate a port or group of ports by choosing a port or group of ports by using the pull-
down menusUnit and From/To and clicking Apply. The Reauthenticate Port Tabledisplays the current status of the
reauthenticated port(s) once you have clicked Apply.
Click Port Access Entity > PAE System Control > Reauthenticate Port(s) to open one of the two following windows:
Figure 6- 75. Reauthenticate Port (Port-Based) window
Figure 6- 76. Reauthenticate Port (MAC-Based) window
These windows display the following information:
Parameter Description
Unit
The unit where the reauthenticated port resides.
Port
The port number of the reauthenticated port.
MAC Address
Displays the physical address of the Switch where the port resides.
Auth State
The Authenticator State will display one of the following: Initialize, Disconnected,
Connecting, Authenticating, Authenticated, Aborting, Held, ForceAuth, ForceUnauth,
and N/A.
BackendState
The Backend State will display one of the following: Request, Response, Success, Fail,
Timeout, Idle, Initialize, and N/A.
OpenDir
Operational Controlled Directions are both and in.
PortStatus
The status of the controlled port can be Authorized, Unauthorized, or N/A.
126