D-Link xStack DXS-3350SR Installation & User Manual - page 161
DXS-3350SR Gigabit Layer 3 Switch
The Link-State Acknowledgment Packet
Link-State Acknowledgment packets are OSPF packet type 5. To make the folding of link-state advertisements reliable,
flooded advertisements are explicitly acknowledged. This acknowledgment is accomplished through the sending and
receiving of Link-State Acknowledgment packets. Multiple link-state advertisements can be acknowledged in a single
Link-State Acknowledgment packet.
Depending on the state of the sending interface and the source of the advertisements being acknowledged, a Link-State
Acknowledgment packet is sent either to the multicast address AllSPFRouters, to the multicast address AllDRouters, or as a
unicast packet.
The format of this packet is similar to that of the Data Description packet. The body of both packets is simply a list of link-
state advertisement headers.
The format of the Link-State Acknowledgment packet is shown below:
Version No.
Packet Length
Router ID
Area ID
Authentication Type
Authentication
Authentication
Checksum
Link-State Acknowledgment Packet
5
Link-State Advertisement Header ...
Each acknowledged link-state advertisement is described by its link-state advertisement header. It contains all the
information required to uniquely identify both the advertisement and the advertisement’s current instance.
Link-State Advertisement Formats
There are five distinct types of link-state advertisements. Each link-state advertisement begins with a standard 20-byte link-
state advertisement header. Succeeding sections then diagram the separate link-state advertisement types.
Each link-state advertisement describes a piece of the OSPF routing domain. Every router originates a router links
advertisement. In addition, whenever the router is elected as the Designated Router, it originates a network links
advertisement. Other types of link-state advertisements may also be originated. The flooding algorithm is reliable, ensuring
that all routers have the same collection of link-state advertisements. The collection of advertisements is called the link-
state (or topological) database.
From the link-state database, each router constructs a shortest path tree with itself as root. This yields a routing table.
There are five types of link state advertisements, each using a common link state header. These are:
1. Router
Links
Advertisements
2. Network Links Advertisements
3. Summary Link Advertisements
4. Autonomous System Link Advertisements
152