D-Link xStack DXS-3350SR Installation & User Manual - Package Contents

DXS-3350SR Gigabit Layer 3 Switch 

Package Contents 

Open the shipping carton of the Switch and carefully unpack its contents. The carton should contain the following items: 

•  One DXS-3350SR Stackable Switch 

•  One AC power cord  

•  This Manual  

•  Registration card 

•  Mounting kit (two brackets and screws) 

•  Four rubber feet with adhesive backing 

•  RS-232 console cable 

•  One Cable Infinband 4X50CM 

•  One CD Kit for User’s Guide/CLI/D-View module 

•  One CD Kit for D-View 5.1 Trial version. 

•  One Generic Quick Installation Guide 

If any item is found missing or damaged, please contact your local D-Link Reseller for replacement. 

Before You Connect to the Network 

The site where you install the Switch may greatly affect its performance. Please follow these guidelines for setting up the 

Switch. 

•  Install the Switch on a sturdy, level surface that can support at least 6.6 lb. (3 kg) of weight. Do not place heavy 

objects on the Switch. 

•  The power outlet should be within 1.82 meters (6 feet) of the Switch. 

•  Visually inspect the power cord and see that it is fully secured to the AC power port. 

•  Make sure that there is proper heat dissipation from and adequate ventilation around the Switch. Leave at least 10 

cm (4 inches) of space at the front and rear of the Switch for ventilation. 

•  Install the Switch in a fairly cool and dry place for the acceptable temperature and humidity operating ranges. 

•  Install the Switch in a site free from strong electromagnetic field generators (such as motors), vibration, dust, and 

direct exposure to sunlight. 

•  When installing the Switch on a level surface, attach the rubber feet to the bottom of the device. The rubber feet 

cushion the Switch, protect the casing from scratches and prevent it from scratching other surfaces. 

13