D-Link xStack DXS-3350SR Installation & User Manual - page 207
DXS-3350SR Gigabit Layer 3 Switch
To configure the SSH server on the Switch, modify the following parameters and click Apply:
Parameter Description
SSH Server Status
Use the pull-down menu to enable or disable SSH on the Switch. The default is Disabled.
Max Session (1-8)
Enter a value between 1 and 8 to set the number of users that may simultaneously access the
Switch. The default setting is 8.
Time Out (120-600)
Allows the user to set the connection timeout. The use may set a time between 120 and 600
seconds. The default setting is 300 seconds.
Auth. Fail (2-20)
Allows the Administrator to set the maximum number of attempts that a user may try to log on to
the SSH Server utilizing the SSH authentication. After the maximum number of attempts has
been exceeded, the Switch will be disconnected and the user must reconnect to the Switch to
attempt another login. The number of maximum attempts may be set between 2 and 20. The
default setting is 2.
Session Rekeying
This field is used to set the time period that the Switch will change the security shell encryptions
by using the pull-down menu. The available options are Never, 10 min, 30 min, and 60 min. The
default setting is Never.
198