D-Link xStack DXS-3350SR Installation & User Manual - Stp Instance Settings
DXS-3350SR Gigabit Layer 3 Switch
STP Instance Settings
The following window displays MSTIs currently set on the Switch. To view the following table, click Configuration >
Spanning Tree > STP Instance Settings:
Figure 6- 25. STP Instance Settings
To configure the Priority settings for an existing Instance Type entry, click on its hyperlinked name in the STP Instance
Table, which will reveal the following window to configure:
Figure 6- 26. STP Instance ID Settings modify menu
Set the Priority to the desired value (0-61440) and click Apply to implement changes made.
Parameter
Description
Instance Type
A MSTI ID classifies each instance type. CIST refers to the default MSTI configuration
set on the Switch. Click the hyperlink to change the Priority setting for a listed
Instance Type.
Instance Status
The current status of the corresponding MSTI ID is listed in the STP Intance Table.
Instance Priority
The priority of the corresponding MSTI ID. The lowest priority will be the root bridge.
To change the priority setting for an Instance Type, click the corresponding hyperlink
listed under the Instance Type and set the Priority in the Instance ID Settigns menu
(pictured above).
69