D-Link xStack DXS-3350SR Installation & User Manual - page 144
DXS-3350SR Gigabit Layer 3 Switch
To view the Route Preference Settings window, click Configuration > Layer 3 IP Networking > Route Preference
Settings:
Figure 6- 83. Current and New Route Preference Settings window
The following fields can be viewed or set:
Parameter Description
RIP(1-999)
Enter a value between 1 and 999 to set the route preference for RIP. The lower the
value, the higher the chance the specified protocol will be chosen as the best path for
routing packets. The default value is 100.
OSPF Intra(1-999)
Enter a value between 1 and 999 to set the route preference for OSPF Intra. The
lower the value, the higher the chance the specified protocol will be chosen as the
best path for routing packets. The default value is 80.
STATIC(1-999)
Enter a value between 1 and 999 to set the route preference for Static. The lower the
value, the higher the chance the specified protocol will be chosen as the best path for
routing packets. The default value is 60.
OSPF Inter(1-999)
Enter a value between 1 and 999 to set the route preference for OSPF Inter. The
lower the value, the higher the chance the specified protocol will be chosen as the
best path for routing packets. The default value is 90.
OSPF ExtT1(1-999)
Enter a value between 1 and 999 to set the route preference for OSPF ExtT1. The
lower the value, the higher the chance the specified protocol will be chosen as the
best path for routing packets. The default value is 110.
OSPF ExtT2(1-999)
Enter a value between 1 and 999 to set the route preference for OSPF ExtT2. The
lower the value, the higher the chance the specified protocol will be chosen as the
best path for routing packets. The default value is 115.
Click Apply to implement changes made.
135