D-Link xStack DXS-3350SR Installation & User Manual - Pim Monitoring
DXS-3350SR Gigabit Layer 3 Switch
DVMRP Routing Next Hop Table
The DVMRP Routing Next Hop Table contains information regarding the next-hop for forwarding multicast packets on
outgoing interfaces. Each entry in the DVMRP Routing Next Hop Table refers to the next-hop of a specific source to a
specific multicast group address. This table is found in the Monitoring menu under DVMRP Monitoring, with the heading
Browse DVMRP Routing Next Hop Table. To search this table, enter either an Interface Name or Source IP Address
into the respective fieldand click the Find button. The next hop of that DVMRP Routing entry will appear in the DVMRP
Routing Next Hop Table below.
5
PIM Neighbor Address Table
Figure 8- 3 . DVMRP Routing Next Hop Table
PIM Monitoring
Multicast routers use Protocol Independent Multicast (PIM) to determine which other multicast routers should receive
multicast packets. To find out more information concerning PIM and its configuration on the Switch, see the IP Multicasting
chapter of Section 4, Configuration.
The PIM Neighbor Address Table contains information regarding each of a router’s PIM neighbors. This screen may be
found in the Monitoring folder under the heading PIM Monitor. To search this table, enter either an Interface Name or
Neighbor Address into the respective fieldand click the Find button. PIM neighbors of that entry will appear in the PIM
Neighbor Table below.
Figure 8- 36. PIM Neighbor Address Table
241