D-Link xStack DXS-3350SR Installation & User Manual - Forwarding Filtering
DXS-3350SR Gigabit Layer 3 Switch
Forwarding Filtering
Unicast Forwarding
Open the Forwarding Filtering folder in the Configuration menu and click on the Unicast Forwarding link. This will
open the Setup Static Unicast Forwarding Table, as shown below:
Figure 6- 28. Setup Static Unicast Forwarding Table and current Static Unicast Forwarding Table
To add or edit an entry, define the following parameters and then click Add/Modify:
Parameter
Description
VLAN ID (VID)
The VLAN ID number of the VLAN on which the above Unicast MAC address resides.
MAC Address
The MAC address associated with packets that are statically forwarded. Any packets
from this MAC address (that are not received on the selected port) are forwarded to the
selected port. This must be a unicast MAC address.
Unit
Select the unit in the stack containing the port to which packets associated with the
MAC address will be forwarded.
Port
The port on the chosen Switch to which packets associated with the MAC address will
be forwarded.
Click Apply to implement the changes made. To delete an entry in the Static Unicast Forwarding Table, click the
corresponding
under the Delete heading.
72