Riso 570 User Manual - page 123
Advanced Features
Setting Up User Management [User Management]
119
Clearing User Registration
1
Display the User Management
screen.
Follow steps 1 to 4 in “Selecting Recognition and
Identification System” (
)
p.107)
2
Touch [Create User].
3
Touch [Clear].
4
Touch the User Button to clear.
Registered buttons are displayed with a solid line.
Unregistered buttons and “0 Admin” button are
grayed-out and are not available.
Important!:
• Once the user registration is cleared, it cannot
be recovered.
5
Touch [OK].
The following screen appears.
Returns to the Create User screen.
The setting of the selected user is cleared.
Close
User Management
Select management level
Input user and group information
High/Full Management
Management level
Create User
Rename Group
Reset all counters/Select recognition method
Reset Counter
Recognized by
0
Admin
5
U-5
Create User
Close
1
User 01
6
U-6
Change
2
U-2
7
U-7
Register
3
U-3
8
U-8
Clear
Select a Button to be Cleared
4
U-4
9
U-9
P .1/10
0
Admin
5
U-5
Create User
Close
1
User 01
6
U-6
Change
2
U-2
7
U-7
Register
3
U-3
8
U-8
Clear
Select a Button to be Cleared
4
U-4
9
U-9
P .1/10
0
5
U-5
Create User
Close
1
User 01
6
U-6
Change
2
U-2
7
U-7
Register
3
U-3
8
U-8
Clear
Select a Button to be Cleared
4
U-4
9
U-9
P .1/10
Cancel
OK
1 :User 01
This user will be deleted
OK?
0
Admin
5
U-5
Create User
Close
1
U-1
6
U-6
Change
2
U-2
7
U-7
Register
3
U-3
8
U-8
Clear
U-1- Cleared
4
U-4
9
U-9
P .1/10
CAN_EN.book Page 119 Friday, September 21, 2007 10:42 AM