Riso 570 User Manual - page 228
Troubleshooting
When a Message Displays
224
J00-000:Paper Jam Errors
Displays when the original document or printing paper is jammed
inside the machine, the ADF unit (Option) or Sorter (option).
The location of the paper jam is indicated by the flashing icon
(
-
) in the illustration. Refer to the table below (
-
) and
resolve the issue as indicated.
Note:
• Use appropriate printing paper to prevent paper jams. Also
select appropriate original document suitable for the ADF unit
(Option).
)
p.15
)
p.17
Area
Indicated/
Blinking
Possible Cause
Action
Paper is jammed in the Paper Feed area.
1)
Check the paper feed side and remove the
jammed paper.
2)
Reload printing paper.
3)
Press the
key if error display does not clear.
When using special paper, adjust the Paper
Feed Pressure Adjustment Lever according
to the paper characteristics.
)
p.33
The original is jammed in the ADF unit (Option).
Removing in the document insertion direction
Pull the ADF Original Release Lever (Option) to
the right, and remove the original.
When removing in the document ejection
direction
Raise the Platen Cover, turn the ADF Original
Release Dial and remove the original.
OK
Paper Jam
Remove Paper in Indicated Areas
and Press [OK] Button
Meter Display
ADF Original Release Lever
Original Release Dial
CAN_EN.book Page 224 Friday, September 21, 2007 10:42 AM