Riso 570 User Manual - page 127
Advanced Features
Setting Up User Management [User Management]
123
Clearing All User Counters
All user counters can be cleared in a single procedure.
Important!:
• After the counter is cleared, it cannot be recovered.
1
Display the User Management
screen.
Follow steps 1 to 4 in “Selecting Recognition and
Identification System” (
)
p.107)
2
Touch [Reset Counter].
3
Touch [OK].
The following screen appears.
Returns to the User Management screen.
All user counters are cleared.
To close the User Management setting, touch
[Close]
on the User Management screen to return
to the Admin. screen.
Close
User Management
Select management level
Input user and group information
High/Full Management
Management level
Create User
Rename Group
Reset all counters/Select recognition method
Reset Counter
Recognized by
Close
User Management
Select managment level
Input user and group information
High/Full Managmenet
Management Level
Create User
Rename Group
Reset all counters/Select recognition method
Reset Counter
Recognized by
Cancel
OK
All user’s counter
will be reseted
OK?
Close
User Management
Select management level
Input user and group information
High/Full Management
Management level
Create User
Rename Group
Reset all counters/Select recognition method
Reset Counter
Recognized by
CAN_EN.book Page 123 Friday, September 21, 2007 10:42 AM