Riso 570 User Manual - Reproducing The Master
Advanced Features
Reproducing the Master [Renew Page][Auto Page Renewal]
147
Reproducing the Master
[Renew Page][Auto Page Renewal]
The data from the last master-making process is temporarily stored on the machine.
Using this data, another master can be reproduced without repeating steps to scan the same original.
You can “Rotate” the original and recreate a master.
“Auto Page Renewal” is a function that automatically recreates a master when a specified number of pages are
printed. If you are printing a large-volume job of thousands or tens of thousands of copies, the master may degrade
before the job is completed.
If you set “Auto Page Renewal” to “ON” prior to starting a large-volume print job, a master will be automatically re-created
when the specified number of copies is reached (Auto Renewal Point). This allows you to maintain a consistent print quality
from start to finish.
Note:
• “Renew Page” works with data sent from a computer as well. However, if multiple pages exist, only the last page
will be processed with “Renew Page”.
• “Renew Page” function is not available:
– immediately after startup
– after pressing the
key
– after performing “Confidential”
– after performing “Multi-Up Print”
– after performing “Book Shadow”
– when an error has occurred during master-making
– after master-making for Data Output Mode (when the optional Key Card Counter is installed.)
• The number of pages in the proof copy when using “Auto Page Renewal” can be adjusted using “Admin.”.
)
p.166
• Once the print position has been adjusted the new position is saved when master-making is resumed, avoiding the
need for readjustment.
Using Page Renewal
1
Touch [Functions] on the Print Basic
Screen.
2
Touch [Renew Page].
Reserva-
tion
Interval
Renew Page
Select Print Quantity
Basic
Selections
Functions
Admin.
Paper
Black
Idle
Info
Print Position
Basic
Selections
Functions
Admin.
Select Print Quantity
P.
Idling Action
Confidential
3/4
Ink Saving
Sorter
Renew Page
Auto Page Renewal
Interval
Editor
CAN_EN.book Page 147 Friday, September 21, 2007 10:42 AM