Riso 570 User Manual - page 41
Basic Operations
Printing from a Paper Document or Book
37
Printing from a Paper Document or Book
The steps for scanning an original for printing is explained below.
1
Make sure the machine is ON.
Check the Control Panel.
Note:
• When the power is OFF, both the Display and
the
key are off. Turn the power ON.
)
p.32
• If the
key is lit, the machine is in Energy
Saving mode. Press the
key to cancel
Energy Saving mode.
2
Check for printing paper.
Make sure paper is loaded.
To load or to change the paper, see the following
page:
)
p.32
After replacing with paper of a different size,
adjust the position of the Receiving Tray Paper
Guides and Paper Stopper.
)
p.35
3
Check the Display.
The initial screen differs depending on the setting
of “Display Priority” of “Admin.”.
• If current screen is in Mode Selection, touch
[MasterMake]
to switch to the Master Making
Basic Screen.
The following screen appears.
• Make sure either the Master Making Basic
Screen or Print Basic Screen is displayed, and
go to step 4.
Note:
• When you see
[Data-Map]
in the Status Area,
the machine is busy receiving electronic data
from the computer. Please wait a moment.
• When the following screens are displayed, fol-
low the message on the screen.
For details, see
)
p.42.
A4
Line
Black
Page (A4)
Basic
Selections
Functions
Admin.
Contrast
Auto
Size
Paper
Idle
Reserva-
tion
Info
Ready to Make Master
Multi-Up
Editor
Dot
Process
RISO EZ570A
Select an Operation Mode
MasterMake
P r i n t i n g
A4
Line
Black
Image
Basic
Selections
Functions
Admin.
Contrast
Auto
Size
Paper
Idle
Info
Ready to Make Master
Reserva-
tion
Multi-Up
Editor
Dot
Process
CAN_EN.book Page 37 Friday, September 21, 2007 10:42 AM