Riso 570 User Manual - [My Direct
Advanced Features
Customizing the Direct Access Area [My Direct Access]
158
Customizing the Direct Access Area
[My Direct
Access]
Normally, the functions displayed in the Direct Access Area of the Basic Screen are already registered by default set-
ting or changed by the administrator. However, if User Management is set up, each user can register the functions
displayed in the Direct Access Area using “My Direct Access”.
The functions that can be displayed in the Direct Access Area can individually be registered in each mode (Master
Making/Print/Scanning).
Up to 4 functions can be registered.
“My Direct Access” kept by each user can be displayed after the user has been identified and cannot be changed by
other users.
Important!:
• “My Direct Access” can be set when “Management Level” is set to “High/Full Management” in “User Management”.
Note:
• If “My Direct Access” is not set, the functions registered via the usual methods are displayed in the Direct Access
Area. (
)
p.171)
1
Touch [Functions] on the Basic
Screen for each mode.
2
Touch [My Direct Access].
If “Management Level” is not set to “High/Full Man-
agement” in “User Management”, the
[My Direct
Access]
button is grayed-out and is not available.
A4
Line
Black
Image
Basic
Selections
Functions
Admin.
Contrast
Auto
Size
Paper
Idle
Info
Ready to Make Master
Reserva-
tion
Multi-Up
Editor
Dot
Process
Direct Access Area
A4
Black
Image
Basic
Selections
Functions
Admin.
Contrast
Size
Paper
Idle
Info
Ready to Make Master
Reserva-
tion
Multi-Up
Editor
Dot
Process
Line
Auto
4/4
P.
Basic
Selections
Functions
Admin.
Ready to Make Master
Editor
Special Paper Ctrl
ID Counter Report
Special Paper Ctrl
Job Separation
Jump Wing Control
My Direct Access
CAN_EN.book Page 158 Friday, September 21, 2007 10:42 AM