Riso 570 User Manual - page 73

Functions for Master-Making

Printing Multiple Originals on One Sheet [2 Up] [Multi-Up Print]

69

Margin

Leave a margin of at least 5 mm (

3

/

16

") on the top edge of the Glass Platen or the ADF unit (Option). Allowing a proper 

margin is critical in well-balanced Multi-Up positioning.

)

p.18

Note:

• A margin on the top edge will remain regardless of enlargement or reduction settings.

Orientation of Print Paper

Always place paper in the Paper Feed Tray as shown below.

Multi-Up Interval

“Multi-Up” performs scanning for the number of sheets.

The interval between the first scan and the second scan is called “Multi-Up Interval”.

Replace originals or change settings for the second scan during the “Multi-Up Interval”.

Note:

• Default “Multi-Up Interval” can be set on the Admin. screen. The factory default is 15 seconds. 

)

p.165

5mm (

3

/

16

")

(Top Side)

Set Position

The Glass Platen 

or the ADF unit (Option)

Paper feeding direction

CAN_EN.book  Page 69  Friday, September 21, 2007  10:42 AM