Riso 570 User Manual - Adjusting The Print Density
Manual is about: EZ series
of
262
Functions for Printing
Adjusting the Print Density [Print Density Adjustment]
89
Adjusting the Print Density
[Print Density Adjustment]
You can select the print density from five levels.
The print density may be adjusted while printing is in progress.
Important!:
• “Print Density” is not available when
[Ink Saving]
is selected.
)
p.64
Note:
• The default print density can be set on the Admin. screen.
The factory default is set at level 3 (Standard).
)
p.163
Press the
or
key to adjust the
print density.
1)
Print Density Adjustment Indicator
Shows the current print density.
2)
Key
Increases the print density incrementally.
3)
Key
Decreases the print density incrementally.
CAN_EN.book Page 89 Friday, September 21, 2007 10:42 AM