Riso 570 User Manual - page 131
Advanced Features
Automatic Sorting Into Groups [Program]
127
Setting Up for Programed Printing
The steps below applies to both Single Page Mode Program (single original) and Multi-Page Mode Program (multiple
originals).
Both the Touch Screen and Print Quantity Keys (and related keys) may be used for this operation.
1
Press the
key.
Note:
• Press the
key and skip to step 3 of the
“Single Page Mode”. Press the
key and
skip to step 3 of the “Multi-Page Mode”.
• Alternatively, from the Master Making Basic
Screen, touch
[Functions]
then
[Program]
to
display the Program Type screen.
2
Touch [Single] or [Multiple].
3
Enter the numbers using the Print
Quantity Keys.
For Single Page Mode
1)
Enter the number of copies using the Print
Quantity Keys.
2)
Press the
key or the
key.
3)
Enter the number of sets (in the group)
using the Print Quantity Keys.
4)
Press the
key or the
key.
To program more than one group, repeat steps
1) to 4).
Note:
• To cancel or change a number, press the
key and enter again.
• To clear all (number of copies and number of
sets), touch
[Clear All]
.
• The total number of all copies to be printed is
shown on the top of the screen.
Black
Idle
Info
Line
Image
Basic
Admin.
Ready to Make Master
Reserva-
tion
Multi-Up
Editor
Dot
Process
D-Feed
Check
A4
A4
Program Type
Single
Program List
Multiple
Close
0 1 G
0 2 G
Black
Idle
Info
Line
Image
Basic
Admin.
Ready to Make Master
Reserva-
tion
Multi-Up
Editor
Dot
Process
D-Feed
Check
A4
A4
Program Type
Single
Program List
Multiple
Close
0 1 G
0 2 G
10
2
1
30
20
2
40
5
50
3
60
70
Cancel
OK
Single Page Mode
P.1/9
Program-A
Total:1280
Cps.
Sets
Cps.
Sets
02G
01G
03G
04G
05G
06G
Entry/Call
Revise
Clear All
CAN_EN.book Page 127 Friday, September 21, 2007 10:42 AM