Riso 570 User Manual - [Direct Print]
Basic Operations
Printing from a Computer Data [Direct Print] [USB Job List]
43
Printing from a Computer Data
[Direct Print]
[USB Job List]
This machine can directly print the original created on the computer by connecting the computer and machine by cable.
The data will be digitally processed into a master, thus achieving higher quality prints than the master-making of
scanned originals.
Furthermore, a USB slot for connecting a USB Flash Drive is supplied with this machine so that you can print by con-
necting a USB Flash Drive that stores the data of originals to the machine even if the computer and machine are not
connected by cable.
Important!:
• First, install a proper printer driver on your computer. See the “RISO Printer Driver User’s Guide” for installation details.
• A printer driver and a USB flash-via-printer driver are provided. For details, see the "RISO Printer Driver User’s Guide”.
Note:
• This manual provides only a summary of functions available when printing from a computer.
See the “Riso Printer Driver User’s Guide” for further details on sending data and other settings.
Printing Computer Data
[Direct Print]
The computer and printer must be connected by cable.
Note:
• When “User Management” is set by the administrator, the users will be asked to identify themselves during operations.
)
p.42
1
Make sure the machine is ON.
Check the Control Panel.
Note:
• When the power is OFF, both the Display and
the
key are off. Turn the power ON.
)
p.32
• The machine automatically wakes up from
Energy Saving mode when data is sent from a
computer, and it starts processing the data.
2
Check for printing paper.
Make sure paper is loaded.
To load or to change the paper, see the following page:
)
p.32
After replacing with paper of a different size,
adjust the position of the Receiving Tray Paper
Guides and Paper Stopper.
)
p.35
USB Flash Drive
Connect the USB Flash Drive
to the USB slot
A4
Line
Black
Page (A4)
Basic
Selections
Functions
Admin.
Contrast
Auto
Size
Paper
Idle
Reserva-
tion
Info
Ready to Make Master
Multi-Up
Editor
Dot
Process
CAN_EN.book Page 43 Friday, September 21, 2007 10:42 AM