Riso 570 User Manual - page 227
Troubleshooting
When a Message Displays
223
Wrong-type Master Installed
or Cannot Read Master Info
Replace Master Roll
or Contact dealer/Riso office
Incorrect master is installed.
Set a correct Master Roll.
)
p.202
Important!:
• Use a Master Roll specifically designed
and approved for use with this machine.
Failure to do so may cause problems or
damage to the machine.
The
section on the master
core is missing, or it has worn
off, or it has been tilted.
The
section on the master core
contains information needed for making
masters.
If the machine cannot read the
information, it does not operate. Set a
dedicated Master Roll that has the
mark and is free from wear and tilt.
Wrong-Type Print Drum (Cylinder)
Installed
Replace with Correct Type
Incorrect Print Drum (Cylinder)
is installed.
Install a correct Print Drum (Cylinder).
)
p.209
Important!:
• Use a Print Drum (Cylinder) specifically
designed and approved for use with this
machine. Failure to do so may cause
problems or damage to the machine.
Message
Possible Cause
Action
CAN_EN.book Page 223 Friday, September 21, 2007 10:42 AM