Riso 570 User Manual - page 235
Troubleshooting
When a Message Displays
231
The file size is too large
to store on USB Flash Drive
Change the USB Flash Drive
or delete some files
to make spaces
(Symptom)
Insufficient free space on the USB Flash
Drive.
(Action)
Check the USB Flash Drive data and
delete unnecessary jobs.
Touch
[Close]
.
(Alternatively, press the
key or the
key to clear.)
•
For checking the USB Flash Drive
data
Touch
[USB Job List]
.
!!The Print Drum (Cylinder)
Type
has been Changed!!
Select the Current
Print Drum (Cylinder) Type
(Symptom)
A different type of Print Drum (Cylinder)
has been installed.
(Action)
Select the type of Print Drum (Cylinder)
currently installed.
Alternatively, change back to the same
type of Print Drum (Cylinder) as before.
)
p.209
•
When changing a setting;
In the Confirm Drum (Cylinder) Type
screen, select the type of Print Drum
(Cylinder) currently installed and
touch
[OK]
.
•
When installing a different Print
Drum (Cylinder);
Pull out the Print Drum (Cylinder) and
replace with the same one as before.
When the Print Drum (Cylinder) is re-
installed, the Warning Message will clear.
!! Unmatched Size--
Current Page and
Printing Paper !!
Check Paper Size
(Symptom)
The original data sent from the computer
does not match the print paper size.
(Action)
Check the print paper size and change
paper or size as needed.
•
When resuming the print job;
Touch
[Continue]
.
(Alternatively, press the
key to
print.)
•
When stopping the print job;
Touch
[Cancel]
.
(Alternatively, press the
key or
the
key to clear.)
Message
Symptom/Action
How to Clear a Pop-Up Message
CAN_EN.book Page 231 Friday, September 21, 2007 10:42 AM